You know you may be stuck when.....

[BearCreek Majors]

......the mud is on top of the counterweight.

[Grani]

The other end of the machine is made for digging, NOT the rear end.

[BearCreek Majors]

I will be sure to tell them that!

Pat

[ford5000y]

Oohh, I thought it was the clay model from the factory!

[BearCreek Majors]

We do have our fair share of clay around here!

Pat

[ford5000y]

... That happened to have a smiley on one side

[Bensdexta]

How did you get out...?

[BearCreek Majors]

They got it out with a dozer, the worst part was getting the chains hooked, they spent close to two hours hand digging through the muck to get two chains attached to the lower running gear and one to the boom, they then started to move it real slow, almost standing the dozer up on the back of its tracks, letting the nose slowly come back down, and then repeating several times until it finally came up out of the muck.

Pat

[tom lad]

its the vacuum / suction aint it

u know it bad when its coming in the cab

around here we have soft moss land , that's really good for burying heavy machines , some farms have 15 ft. + of moss , so if you start to sink ur in a mess!!