Ransomes TS59e plough
-
- Not Quite Blue Yet
- Posts: 38
- Joined: Sat Dec 19, 2009 5:35 pm
- Location: Leeds, West Yorkshire
Ransomes TS59e plough
Can anyone tell me how to replace the discs, they are fixed to the hub by what look like rivets. I need at least one new one as it is bent any ideas on who could supply them?
-
- Site Governance Team & Expert Team
- Posts: 2069
- Joined: Wed Apr 16, 2008 8:56 pm
- Location: Arnemuiden, The Netherlands
- Contact:
Re: Ransomes TS59e plough
Trevor,
Look at this site. Here you can find moost parts.
http://www.westlakeploughparts.co.uk/plough_parts.html
Look at this site. Here you can find moost parts.
http://www.westlakeploughparts.co.uk/plough_parts.html
Kind regards, Henk
Fordson New Major February 1957 Mark I
Fordson New Major February 1957 Mark I
Re: Ransomes TS59e plough
they are riveted on mate , but i have seen some poeples bolted on ? i dont know if this works in the long term .
when ive had to rivet things like that on i would bolt in on first to line up the holes .
i guess mark at westlake will know ?
hope this helps m8
tom
when ive had to rivet things like that on i would bolt in on first to line up the holes .
i guess mark at westlake will know ?
hope this helps m8
tom
Some mornings I wake up grumpy, but most mornings I let her sleep in.
Re: Ransomes TS59e plough
They are riveted, usually with hot rivets. You might need a mortgage with the supplier you suggest.
I believe "Old Twenty Tractor Parts" have some parts.
I believe "Old Twenty Tractor Parts" have some parts.
Fordson Tractor Pages, now officially linked to: Fordson Tractor Club of Australia, Ford and Fordson Association and Blue Force.
Brian
Brian