Cylinder head

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Post Reply
Dazo1960
Not Quite Blue Yet
Posts: 27
Joined: Fri Mar 20, 2015 12:15 pm

Cylinder head

Post by Dazo1960 »

Best tool for removing the cylinder head it's solid it won't budge cheers Darryl
Top
anthonygos
True Blue
Posts: 79
Joined: Tue Nov 16, 2010 8:34 pm
Location: Now in South Wales/Born in Essex

Re: Cylinder head

Post by anthonygos »

I've never had any problems removing any of them, are you sure that you have removed all 17 bolts.
Don't just leave it in the shed, Fordson's are made to work, so take it out and work it....!
Top
Brian
Grumpy
Grumpy
Posts: 5216
Joined: Wed Apr 16, 2008 2:07 pm
Location: Norfolk, England.

Re: Cylinder head

Post by Brian »

They can be tight sometimes but check the bolts as Anthony says. Also remove all the injectors, they stick through the bottom of the head and are easily broken if you catch them on the sleeves or put the head face down on the bench.

Been there, done that, bought the new nozzles :mrgreen: .
Fordson Tractor Pages, now officially linked to: Fordson Tractor Club of Australia, Ford and Fordson Association and Blue Force.
Brian
Top
Post Reply

Return to “Fordson New Major”