belt pulley - splines

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Post Reply
Evos3960
Not Quite Blue Yet
Posts: 44
Joined: Sun Feb 15, 2015 5:58 pm

Re: belt pulley - splines

Post by Evos3960 »

Helloo Henk,

Thank you for replying to my question, so it isn't a problem.

Many thanks,

Peter
Top
Agromick82
Not Quite Blue Yet
Posts: 11
Joined: Sat Aug 05, 2017 12:08 pm

Re: belt pulley - splines

Post by Agromick82 »

Hi all I just removed my pulley and the spline seal is of flat gasket material and seals against the bearing face and the center hub
This is a 64 model and appears to be original
Top
mathias1
Site Governance Team
Site Governance Team
Posts: 809
Joined: Fri Jul 08, 2016 7:11 pm
Location: Antwerp - Belgium

Re: belt pulley - splines

Post by mathias1 »

Anyone did got an o-ring in it? Do we know the size of it? This one isn't listed with its size in the parts manual.
Fordson Super Major New Performance
County Super 4 built on the Fordson Super Major
Selene built on the Fordson Super Major New Performance with Silvant winch
Top
Post Reply

Return to “Fordson New Major”