NM - New  Major

PM - Power Major

SM - Super Major

SMNP - Super Major New Performance

If you believe that something has been placed incorrectly or if you have additions, please contact fordsontractorpages.nl

Linkage parts with numbers of the NM.

Unfortunately I have no linkage part numbers of the PM, but for the most part they correspond to the NM.

Linkage parts with numbers of the SM and SMNP.

Lower link bracket of the NM.

Lower link bracket of the PM.

Lower link bracket of the SM and SMNP.

Lifting slats of the NM and PM. Fixed balls and three holes.

Lifting slats of the SM and SMNP. Interchangeable balls and two or three holes.

Lift arm NM and PM. Square hole.

Lift arm of the SM en SMNP. Spline hole.
Unfortunately I don't have a picture of this.

Upper rod on the left of the NM and PM. Threated on the outside.

Upper rod on the SM and SMNP. Threated on the inside.

Adjustable lower part of the NM en de PM with thread on the inside.

Non adjustable lower part of the SM en de SMNP with thread on the outside.

Leveling box NM and PM.

Leveling box SM and SMNP.

Knuckle on the right side NM and PM.

Knuckle on the left side NM and PM.

Knuckle used on both sides of the SM and SMNP.

Bracket check chain anchor of the NM. The other side is a mirror image. Three mounting holes.

Bracket check chain anchor of the PM. There are now two holes for the chain. Three mounting holes

Bracket check chain anchor of the SM and SMNP. The other side is a mirror image.
All Super brackets are heavy duty, and have four mounting holes.
The model in the above picture can't mount the two hole D-shackles, as in the lower picture, in two positions without having the bracket fowling the short position. The part number for it is a DKN.
The two hole brackets for the two hole D-shackles are rare to find spite them being in the parts books.
The part number is a DDN.

Complete check chain of the NM and PM.

Eyebolt and chackel of the check chain of the NM and PM.

Check chain parts on the lifting slats are used through the whole series. At the rear axle of the NM and PM the eyebolt is long without shackel or round and with shackel. The D shackel is short.

D shackel of the checkchain of the NM and PM.

Check chain nut. This is used on all models.

D shackel of the checkchain from the SM en de SMNP. Only correct fitting in the DDN bracket.

Pin for securing the adjustable lower part of the NM and PM.

Securing pin for the lower part on the lifting slats. This pin is used on all models.

Attachment point for the safety chain between the lifting slats. This part is used on all Major models.

Holder for the locking pin on the lifting slats. This part is used on all Major models.

Rear end with the rear mounted linkage of the NM.