New Performance super major gearbox

[Roadless63]

I am after a gearbox including casing for a 1964 new performance super major, it must be a single stage clutch unit, NOT livedrive please.
Willing to travel so if you have one or know of one or even someone who is breaking a NP major I would be pleased to hear from you.
Regards
Ed

[d.andersen]

how far will you travel , how much are you willing to pay for it ?

[Roadless63]

Do you have one? Price is dependant on condition and what it came out of (ie agricultural tractor with PTO unit underneath or a JCB skid unit which are more common) and distance is not too much of an issue.
Regards
Ed

[d.andersen]

I know were there is a '64 super major tractor, with 6700 hours on the clock .


I could use some of the other parts , but i dont know if it 1 or 2 stage clutch.

but i can find out. if you are interested

[Supermanuel]

I know were there is a '64 super major tractor, with 6700 hours on the clock .


I could use some of the other parts , but i dont know if it 1 or 2 stage clutch.

but i can find out. if you are interested

If you have only one spined shaft to clutch it is not live, 2 splined shafts to the clutch, a smaller inside a bigger means live.

It is of course no problem, as the only difference is the primary box, which can be easily changed.

[super6954]

Hi Just Reading the posts here I think you guys are going to have to state where you are located in the world as somebody is going to have to maybe go to a different country if they want this transmision .
I found this out thinking D anderson was in the usa from the post on the raised pto unit and hes not hes in europe .
Regards Robert

[Roadless63]

I have sent you a PM
Regards
Ed

I know were there is a '64 super major tractor, with 6700 hours on the clock .


I could use some of the other parts , but i dont know if it 1 or 2 stage clutch.

but i can find out. if you are interested