Changing to double acting remotes.

Pepper Farms · Post by **Pepper Farms** » Thu Feb 02, 2012 1:40 am

I have a 1964 Super Major and am looking at changing the single remote hydraulics to a double acting one. Just wondering if any one else has done this and if it is as straight forward as it looks (4 bolts or so and a simple switch over). Also I was wondering if any one can tell me what the levers and knobs do on the control thats under the seat. Thanks.

supermajor61 · Post by **supermajor61** » Thu Feb 02, 2012 11:45 am

If you search the New Major forum for "Super Major - DAR fitment" there was a long post on this subject.

Post by **Brian** » Thu Feb 02, 2012 5:48 pm

Hope this helps.

You cannot fit just any DAR Valve, it has to be one for a Super Major/Dexta. The later '000nd Series look similar but the porting is wrong.

You can use a separate unit and take the supply from the Aux.Port then drill and tap the filler plug for the return.

Pepper Farms · Post by **Pepper Farms** » Sat Feb 04, 2012 2:15 am

Thanks for the information guys. We got the DAR changed easily and it works great.

Kjetil · Post by **Kjetil** » Thu Feb 23, 2012 7:38 pm

Show us a picture of your DAR, please?

The Fordson Tractor Pages Forum

Changing to double acting remotes.

Changing to double acting remotes.

Re: Changing to double acting remotes.

Re: Changing to double acting remotes.

Re: Changing to double acting remotes.

Re: Changing to double acting remotes.