Major Aux drive bearings

[thestig246]

Hi all

does anyone know where new bearings and seals can be sourced for the drive that comes off the timming gears for the injector pump and oil pump?? i cant find the old ones for love nor money


dan

[cooperFPM]

Hi

Don't know if this is any help or not but these are the original part numbers according to the old parts book i have,
front bearing E80-CP-9
rear bearing E1ADKN-66620-A
seal E1ADDN-66610-A

Whether your local dealership can shed some light on what size they are or if they are still available

Hope this is of some use
Adrian

[henk]

This list could help/
http://people.zeelandnet.nl/hmdetroije/ ... arings.pdf

[R W]

Have you tried Agriline.

[thestig246]

yeah they only do repair kits for the injector pump itself unfortunetly , but they said they will be selling them in the near future

[Kiwi Kev]

Hi all

does anyone know where new bearings and seals can be sourced for the drive that comes off the timming gears for the injector pump and oil pump?? i cant find the old ones for love nor money


dan

Just measure the OD and the ID of the bearings and seal, and then go to a bearing/seal shop(hydraulic or engineering shop).
Bearings and seals are reasonably standard sizes, so are not hard to find.
Kiwi Kev

[liam]

Silver fox tractor parts have the kit listed on ebay for 27.99.Agriline still have the kit listed no 9572, hope this helps.Liam.

[thestig246]

hi many thanks guys, found these on ebay, (silverfox) http://www.ebay.co.uk/itm/Fordson-Major ... 0465138311