
'57 FMD white smoke
-
- Not Quite Blue Yet
- Posts: 30
- Joined: Mon Jul 11, 2011 7:55 am
- Location: Mooreton, North Dakota
'57 FMD white smoke
Hi, I was able to pick up a 1957 major last week. Engine #1427275. It starts up but when you give it some throttle it blows a big cloud of white smoke. And when it idles there is some faint white smoke. Anyway I checked the timing. I put the timing mark on 23 degrees and lines on the coupler dont match up. They are almost a inch apart. I loosend the bolts and it only gets about a half of a inch closer. Does that mean somebody took the pump off and put it back on wrong? Heres a picture of the coupler.


-
- True Blue
- Posts: 74
- Joined: Sun Dec 05, 2010 10:38 pm
- Location: North Devon
Re: '57 FMD white smoke
You have a quiet coupling on your engine, probably from a lorry or a skid unit; so the timing marks probably won't line up as an agricultural engine would. Does your engine number have an " S " at the beginning ?
-
- Not Quite Blue Yet
- Posts: 30
- Joined: Mon Jul 11, 2011 7:55 am
- Location: Mooreton, North Dakota
Re: '57 FMD white smoke
I didn't see any S before the numbers. Those two punch marks couldn't be the "new" timing mark?
Re: '57 FMD white smoke
Whilst incorrect timing can give off some white smoke from the exhaust, the most common cause is that water is entering the combustion chambers -- frequently from a bad head gasket or corroded piston liners and/or their seals. Other possible causes are water vapour in the fuel and filters.
Pavel
Pavel