Hydraulics 1962 SM

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Post Reply
Mark1
Not Quite Blue Yet
Posts: 11
Joined: Mon May 12, 2014 5:24 pm

Hydraulics 1962 SM

Post by Mark1 »

HI
I have recently purchased a 1962 Super Major.I have changed PTO seals,gearbox output seal and the crossshaft seals.I now have to get the hydraulics working.
Can anyone tell me if the check valve seat should be a tight fit in its bore or should it slide freely ?
Thanks

ImageCheck valve by markhdm4, on Flickr

Image1962 Fordson SM by markhdm4, on Flickr
Top
liam
True Blue
Posts: 104
Joined: Wed Sep 16, 2009 10:25 pm
Location: Ireland

Re: Hydraulics 1962 SM

Post by liam »

Think its a tight fit Mark,looks like a good project , Liam.
Top
Mark1
Not Quite Blue Yet
Posts: 11
Joined: Mon May 12, 2014 5:24 pm

Re: Hydraulics 1962 SM

Post by Mark1 »

Thanks Liam
I thought it should be tight but some people were telling me it should be free and I wanted to check before putting it back together.
Mark
Top
Post Reply

Return to “Fordson New Major”