A very different Fordson use

Want to share something off-topic? This is where to put it.
Post Reply
essex pete
True Blue
Posts: 216
Joined: Sun Apr 20, 2008 6:35 pm

A very different Fordson use

Post by essex pete »

A link for something interesting. I apologise in advance for the section with the horse but it was a different less era.

http://www.liveleak.com/view?i=568_1233111054

Meanderer
True Blue
Posts: 163
Joined: Wed Apr 16, 2008 12:46 pm
Location: Elora Ontario, Canada (transplanted from Crookwell, NSW, Australia)

Post by Meanderer »

That is probably the most intersting video I've ever seen from the internet! :thumbs:
Not something we would ever have been introduced to here in Australia, but since I'm supposed to be heading for a heavy snow area of Canada, it was of great application interest!

I was wondering and wondering how useful it would be under load until it came to the Log Sleds! My question was more than answered! Surely they didn't use Special Effects back then.

And I was glad to see the horse wasn't still there in the second visit to that spot.

Recommeded viewing! :clap:
'
Regards,
Rick

Bensdexta
True Blue
Posts: 2666
Joined: Mon Sep 15, 2008 12:59 pm
Location: N Wales

Post by Bensdexta »

It's interesting to speculate why this device didn't survive in the long run.

I suspect because the rotors and their spiral 'threads' would wear quickly on a hard surface, so the device is less ubiquitous than the track, which now rules supreme in soft environments.

One wonders if the tractor would also float, as those rotors look pretty buoyant?
All the best
Ben

Grani
True Blue
Posts: 508
Joined: Mon May 05, 2008 12:18 pm
Location: Finland

Post by Grani »

Bensdexta wrote:It's interesting to speculate why this device didn't survive in the long run.

I suspect because the rotors and their spiral 'threads' would wear quickly on a hard surface, so the device is less ubiquitous than the track, which now rules supreme in soft environments.

One wonders if the tractor would also float, as those rotors look pretty buoyant?
All the best
Ben
It would propobly float upside down because the center of gravity must be wery high on a construction like that and rotors to short to make it stable.

Bensdexta
True Blue
Posts: 2666
Joined: Mon Sep 15, 2008 12:59 pm
Location: N Wales

Post by Bensdexta »

Grani wrote:It would propobly float upside down because the center of gravity must be wery high on a construction like that and rotors to short to make it stable.
Possibly. It might be OK - like a catamaran. One would have to do the calculations.

I agree about the high CG; was surprising it didn't turn over during some of the manoeuvres on the video.
Ben

essex pete
True Blue
Posts: 216
Joined: Sun Apr 20, 2008 6:35 pm

Post by essex pete »

Bensdexta wrote:
Grani wrote:It would propobly float upside down because the center of gravity must be wery high on a construction like that and rotors to short to make it stable.
Possibly. It might be OK - like a catamaran. One would have to do the calculations.

I agree about the high CG; was surprising it didn't turn over during some of the manoeuvres on the video.
Ben
Yes he looked as though he was pushing luck.

Mark
True Blue
Posts: 530
Joined: Thu Apr 17, 2008 2:13 am
Location: Eastern Kentucky

Post by Mark »

That was the coolest video that I've seen, I wonder why it didn't make it to market. That would be good to use right now, for places where there is a lot of snow.
Great video :clap:
See ya
Mark

When all else fails, get a bigger hammer

henk
Site Governance Team & Expert Team
Site Governance Team & Expert Team
Posts: 2085
Joined: Wed Apr 16, 2008 8:56 pm
Location: Arnemuiden, The Netherlands
Contact:

Post by henk »

Nice video Pete,

I always are surprised about the simply solutions they use in agriculture.
Thanks for showing.
Kind regards, Henk

Fordson New Major February 1957 Mark I

Meanderer
True Blue
Posts: 163
Joined: Wed Apr 16, 2008 12:46 pm
Location: Elora Ontario, Canada (transplanted from Crookwell, NSW, Australia)

Post by Meanderer »

Here is a bit more about it and a couple of good photos at this forum.

http://forums.aaca.org/ubbthreads.php/u ... 65/gonew/1
'
Regards,
Rick

Post Reply