fitted T adapter in block, put the new sender in and a pro oil pressure gage.
(still have no thermostat in yet) started on 1st flick over from cold (just start up smoke) pressure hit 60 psi and sat there
![Very Happy :D](./images/smilies/icon_biggrin.gif)
so i set of it some thick stuff and dropped the cut hight to make it work harder and had to got back wards to cut some of it, temp did got up to just before the red when in reverse but soon back in blue when going forwards, oil pressure now down to about 15 psi (just under 1 bar) and it stayed there even on tick over when dropping off topper.
what is the lowest working (pto revs) pressure that will not course any damage please, if it runs at 15/20 psi and oil is getting to rockers and not over heating i think i may leave any drastic work to the winter months.
any advice always welcome