This forum is about the Fordson Dexta, Super Dexta and Petrol Dexta.
Mossside
Not Quite Blue Yet
Posts: 4 Joined: Sun Nov 25, 2018 4:02 pm
Post
by Mossside » Mon Nov 26, 2018 7:06 pm
Hi people
Looking for pictures of the super dexta 1964 fuel pipework as not sure if i have the correct fuel tap etc etc .
I also need pictures of the cold start pipework on the inlet manifold many thanks in advance a newbie as everything i order does not fit
Mossside
Not Quite Blue Yet
Posts: 4 Joined: Sun Nov 25, 2018 4:02 pm
Post
by Mossside » Mon Nov 26, 2018 7:08 pm
Sorry just read the rules i am from the UK
kiwiland dexta
True Blue
Posts: 194 Joined: Thu Apr 17, 2008 8:39 am
Location: Blenheim New Zealand
Post
by kiwiland dexta » Sat Dec 01, 2018 8:45 pm
Hi Mossside, This is the parts list image for the Dexta fuel system, hope it helps.
Kind regards
Derek
you know it's a classic when people stop to watch.
Mossside
Not Quite Blue Yet
Posts: 4 Joined: Sun Nov 25, 2018 4:02 pm
Post
by Mossside » Sun Dec 09, 2018 2:40 pm
Derek
Thanks for the help it maybe that i have an incorrect fuel pump as there is no where to attach the pipe from pump to inlet manifold and the pipe from fuel pump to tank is too long so this may be my problem .
Thanks for the help
Mick
PghBill
True Blue
Posts: 168 Joined: Wed Nov 23, 2011 12:24 pm
Location: Pittsburgh,PA.
Post
by PghBill » Mon Dec 10, 2018 4:44 am
it maybe that i have an incorrect fuel pump as there is no where to attach the pipe from pump to inlet manifold
Mosside,
The pipe to the air intake comes from the primer bulb on the fuel tap under the fuel tank.It does not go to the lift pump.
PghBill
True Blue
Posts: 168 Joined: Wed Nov 23, 2011 12:24 pm
Location: Pittsburgh,PA.
Post
by PghBill » Mon Dec 10, 2018 3:27 pm
Mossside
Not Quite Blue Yet
Posts: 4 Joined: Sun Nov 25, 2018 4:02 pm
Post
by Mossside » Fri Dec 14, 2018 5:47 am
Thanks i have the wrong fuel tap then