![Image](https://i.postimg.cc/rws6FvWL/IMG-20191124-143708.jpg)
I used the grinder to cut the old seal housing as I don't have the tools to get off the other way.
![Image](https://i.postimg.cc/SNDF4ynr/IMG-20191124-180034.jpg)
Now I have more room to get the bearing off.
![Image](https://i.postimg.cc/T1c8pxCT/IMG-20191124-180039.jpg)
The new seal house had to be modified as these are only for the standard axles, not for the heavy duty ones.
![Image](https://i.postimg.cc/HspDFJkn/IMG-20191124-180716.jpg)
Seal house cut to right measure
![Image](https://i.postimg.cc/8cGQpcdy/IMG-20191124-205026.jpg)
I'm putting new instant gasket on the trumpet too, it's seams there was no seal at all there. Hope it stops leaking at that place.
![Image](https://i.postimg.cc/kMNPjN9L/IMG-20191124-190808.jpg)
Now putting back together and doing the same on the other side.
Will also give the leaking sump plate some TLC.