Wanted - Dexta lower hydraulic arm
-
MikesDexta
- True Blue
- Posts: 176
- Joined: Tue Jul 11, 2017 10:32 pm
Wanted - Dexta lower hydraulic arm
The RH lower hydraulic arm on my 1959 Dexta has always been welded (2 steel plates either side in what looks to be the attachment of a new ball end. It works but looks pretty bad so I am looking for a 2nd hand arm to replace it.
1959 Dexta
I'm not retired just re-deployed
I'm not retired just re-deployed
-
Jerry Coles
- True Blue
- Posts: 545
- Joined: Thu Apr 17, 2008 9:09 pm
- Location: Camerton, Bath, UK
Re: Wanted - Dexta lower hydraulic arm
Where are you based? I have one you can have. BA20QD NE Somerset
Jerry Coles
Camerton, Bath, UK
West Highland White Terriers, Dexta's, E27N's and DUKW's
Camerton, Bath, UK
West Highland White Terriers, Dexta's, E27N's and DUKW's
-
mathias1
- Site Governance Team
- Posts: 809
- Joined: Fri Jul 08, 2016 7:11 pm
- Location: Antwerp - Belgium
Re: Wanted - Dexta lower hydraulic arm
Mike, you can also use new weld on ends.
Fordson Super Major New Performance
County Super 4 built on the Fordson Super Major
Selene built on the Fordson Super Major New Performance with Silvant winch
County Super 4 built on the Fordson Super Major
Selene built on the Fordson Super Major New Performance with Silvant winch
-
MikesDexta
- True Blue
- Posts: 176
- Joined: Tue Jul 11, 2017 10:32 pm
Re: Wanted - Dexta lower hydraulic arm
Thanks both, I managed to get hold of one. The weld was too far back to solve with a weld on end I'm afraid.
Mike
Mike
1959 Dexta
I'm not retired just re-deployed
I'm not retired just re-deployed