lift asembly arms

GERRY · Post by **GERRY** » Sat Aug 15, 2009 2:55 pm

iam trying to locate a pair of lift arms for the lift ,cover of a dexta, or does anyone know if they can bought new or if the 2000 will fit the dexta . Gerry

Tubal Cain · Post by **Tubal Cain** » Sat Aug 15, 2009 5:56 pm

I don't think that you can buy new arms for the Dexta

If you informed us where you are located it is possible that someone could help you by providing a pair of secondhand arms.

Gerald

GERRY · Post by **GERRY** » Sat Aug 15, 2009 6:33 pm

Hi Gerald I am i ireland if someone has a set i can be conntected by e mail at [macroibin9@gmail.com] sorry about that , when i set up on new board it was form another computer and i had no email , idont know how to put it on now. Anyway if some one has a set please connect me Gerry

Tubal Cain · Post by **Tubal Cain** » Sat Aug 15, 2009 8:06 pm

Gerry,

I am almost certain that I have a spare set, I will have to check and establish whether or not they are handed ie, right and left hand.

If you wish to include your e-mail address on this forum, you have to click on "profile" at the top of the forum page which will raise your profile page up on the screen you can then enter your address in the relevant box and confirm by entering your password.

Gerald

GERRY · Post by **GERRY** » Sat Aug 15, 2009 8:54 pm

Gerald i done as you said my daughter,s email is on the profile but when i tried to change it to mine it came up that my email address was baned, why would this be so as it works every where eles

Away that will be great if the arms do you can get me at this email adress macroibin9@gmail.com Bear with me on this as im not great on the computer. Gerry

Jerry Coles · Post by **Jerry Coles** » Tue Aug 25, 2009 8:35 pm

The lift arms are handed only in respect that the Lynch pin pockets should be on the outside on the lift end. I know 'cos I got mine on wrong first time!

GERRY · Post by **GERRY** » Wed Aug 26, 2009 9:56 am

Thanks for that Gerry ill keep that in mind when i am fitting them , thats one of the great benfits of the board posting your mistakes so the next person doesnt mak them , ialso got my handbrake to work after you gave me the mesurements on the old board

Thanks again Gerry

Ambidextarous · Post by **Ambidextarous** » Fri Aug 28, 2009 8:50 pm

I also have a pair that are no longer needed. I'll eventually put them up here with the rest of my redundant kit.

GERRY · Post by **GERRY** » Sat Aug 29, 2009 12:33 am

Hi Ambidextarous if you whant to email [ macroibin9@gmail.com ] we could dicuss your pair , iam still exchanging emails with Gerald about his set but as yet we havent come to any arrangment, Gerry

Ambidextarous · Post by **Ambidextarous** » Sun Aug 30, 2009 6:26 pm

Hi Gerry, not sure if my Email's working. I've sent a message to your Email address but i may have to send it another way.

GERRY · Post by **GERRY** » Mon Aug 31, 2009 10:28 pm

Ambidextaous i didnt recive your email , it might also be at my end as iam on wireless singnal ,and this can be between good or bad mostly bad ithink it depends on the weather or something , try it again or if you want give me your email here iwill try an sending it from here, only if this suits you . Gerry

GERRY · Post by **GERRY** » Sat Sep 12, 2009 4:47 pm

I would like to thank tubal cain for his help in getting me fixed up with a set of lift arms and for hassel im sure he had , thanks again Gerry

Nisse · Post by **Nisse** » Wed Jan 27, 2010 6:11 pm

I am lifting this thread as I am looking for at least one of theese (right hand) arms as well. Located in Sweden, but transport from the UK should not be a major problem. I have a Super Dexta

Nils

Bensdexta · Post by **Bensdexta** » Wed Jan 27, 2010 7:16 pm

Nisse wrote:I am lifting this thread as I am looking for at least one of theese (right hand) arms as well. Located in Sweden, but transport from the UK should not be a major problem. I have a Super Dexta

Agriline sells them for the Ford 2000, but would it fit?? One could ask them!

Nisse · Post by **Nisse** » Wed Jan 27, 2010 11:15 pm

Bensdexta wrote:
Nisse wrote:I am lifting this thread as I am looking for at least one of theese (right hand) arms as well. Located in Sweden, but transport from the UK should not be a major problem. I have a Super Dexta
Agriline sells them for the Ford 2000, but would it fit?? One could ask them!

I asked for the crosshaft and they told me they didn't have any for the Dexta. I told them that the one of the 2000 looks quite similar on the page. So apparently it does not fit. A pity as I found a good one here in sweden.

But maybe somebody has a 2000 and can take some pictures?

Bensdexta · Post by **Bensdexta** » Thu Jan 28, 2010 12:43 am

Nisse wrote:I asked for the crosshaft and they told me they didn't have any for the Dexta. I told them that the one of the 2000 looks quite similar on the page. So apparently it does not fit. A pity as I found a good one here in sweden. But maybe somebody has a 2000 and can take some pictures?

If you look at the respective parts lists:
Follow the Fordson and NH parts links from http://www.vugot.com/
and enter either Dexta or 2000 as the 'Model', you can see parts for both tractors. It appears that the Dexta and Ford 2000 lift arms are different (despite Agriline's picture)

So suggest you try a breaker or keep looking on ebay - they do come up.
All the best,

Mervyn Spencer · Post by **Mervyn Spencer** » Thu Jan 28, 2010 5:06 pm

Hi Nisse

I might be able to help you with a cross shaft if I am thinking the same as you. Unfortunately I live a very long way from you, but if you are keen we can talk further.

Regards
Mervyn

Emil Nyman · Post by **Emil Nyman** » Thu Jan 28, 2010 7:16 pm

Nisse wrote:
Bensdexta wrote:
Nisse wrote:I am lifting this thread as I am looking for at least one of theese (right hand) arms as well. Located in Sweden, but transport from the UK should not be a major problem. I have a Super Dexta
Agriline sells them for the Ford 2000, but would it fit?? One could ask them!
I asked for the crosshaft and they told me they didn't have any for the Dexta. I told them that the one of the 2000 looks quite similar on the page. So apparently it does not fit. A pity as I found a good one here in sweden.

But maybe somebody has a 2000 and can take some pictures?

The 3000 and super dexta liftingarms have the same chape and lenght. But i dont now if the splines are the same.

I also need two lifting arms for super dexta but the one with the extra hole for the hitch.

Nisse · Post by **Nisse** » Thu Jan 28, 2010 9:16 pm

I also need two lifting arms for super dexta but the one with the extra hole for the hitch.

You'll find these at ebay for incredible prices (do you have the rest of the hitch, or do you need all of it?) You might sell your dexta arms, when you have found the hitch arms

@Mervyn. I think South Afrika is a bit too far

I pulled out the crosshaft of my spareparts dexta and it was OK. not new, but it'll survive me I guess

I found an arm in Germany but I consider it too expensive for my little dexta. I will wait for a better oportunity. At the moment I am checking the scrapyards in sweden.

Bye, Nils[/quote]

Bensdexta · Post by **Bensdexta** » Thu Jan 28, 2010 10:35 pm

Emil Nyman wrote:The 3000 and super dexta liftingarms have the same chape and lenght. But i dont now if the splines are the same.

According to the parts lists:
Follow the Fordson and NH parts links from http://www.vugot.com/
Super/Dexta & 2000/3000 appear to have different part numbers.
All the best,

Bensdexta · Post by **Bensdexta** » Fri Jan 29, 2010 12:09 am

http://cgi.ebay.co.uk/FORDSON-DEXTA-TRA ... 519024b7d2

Nisse · Post by **Nisse** » Fri Jan 29, 2010 11:37 pm

Thanks for the link! I will keep an eye on them.

Different part numbers between Dexta and 2000 wouldn't be so weired as Fordson became part of Ford

But as I don't think the guys at agriline are stupid, they would have the arms on the dexta page if they were the same. So we say they are different

The Fordson Tractor Pages Forum